M20X

M20XAP

M20XAP Active Stage Monitor Speaker The M20XAP is a high-performance active stage monitor speaker professionally designed for live stage monitoring and sound reinforcement applications. It is equipped with two 10-inch long-throw mid-low frequency drivers and a 3-inch high-frequency compression driver matched with a dedicated horn unit, delivering clear vocal reproduction, balanced musical details and ultra-low distortion performance. Built-in professional two-channel DSP power amplifier provides independent power driving for low frequency and high frequency separately. The low-frequency channel outputs 800W, driving two 10-inch woofers in parallel at 4Ω load state. The high-frequency channel outputs 300W, specially powering the high-frequency driver and horn system. With independent amplification design for highs and lows, the speaker eliminates signal interference and provides sufficient dynamic headroom for complex stage sound environments. The unique wedge cabinet structure is optimized for floor stage monitoring placement. The built-in DSP system supports multiple scene presets, precise adjustment of frequency response, phase and transient parameters, achieving smooth phase response and stable sound coverage. Equipped with RS485 network control function, the speaker supports remote status monitoring and online DSP parameter adjustment. With a maximum sound pressure level of 134dB, it ensures stable sound coverage within 15 meters and reliable monitoring effect for stage ranges up to 6 meters. It is widely used in live performances, theaters, banquet halls and multi-functional venues as professional stage floor monitors and front-fill speakers.

M-20

The M-20 is a two-way full range speaker that uses two 10 inch mid to low frequency units combined with a 1.75-inch compression driver The continuous power can reach up to 500W, and the special structural design can be fully applied to stage monitoring and lip speakers The efficient unit configuration of the M-20 speaker can produce a maximum sound pressure level of 132dB in a compact volume, which is sufficient for sound reinforcement applications within a projection distance of 10 meters The M-20 speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved

M-12AP

M-12AP is an active speaker that uses a 12 inch mid low frequency unit combined with a 1.75-inch compression driver The special structural design with a continuous power of up to 350W can be fully applied to stage monitoring The efficient unit configuration of M-12AP speaker can produce a maximum sound pressure level of 128dB in a compact volume, which is sufficient for sound amplification applications within a projection distance of 10 meters The M-12AP speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved The M-12AP is equipped with a built-in DSP processor to process parameter calls, which can obtain the effect of factory preset parameter settings after careful processing of frequency response, frequency division, phase, and transient response. It can be quickly put into use from a good starting point The system can monitor the working status of various power modules in real time through RS485 network or remotely control and set the built-in DSP processing

M-12

M-12 is a two-way full range speaker that uses a 12 inch mid low frequency unit combined with a 1.75-inch compression driver The special structural design with a continuous power of up to 350W can be fully applied to stage monitoring The efficient unit configuration of the M-12 speaker can produce a maximum sound pressure level of 128dB in a compact volume, which is sufficient for sound reinforcement applications within a projection distance of 10 meters The M-12 speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved