Product Categories
The SW-218H uses two high-power speaker units with a rated power of 1200 watts and 18 inch 5-inch voice coils, providing a maximum output sound pressure level of 138dB. The operating frequency range is from 32Hz to 300Hz. The SW-218H can be used in conjunction with CHL series, L series, SW series, or other Beetle full range speaker systems to achieve low-frequency expansion and extension The special compression box design of SW-218H ensures the expansion and extension of the low-frequency range to a greater extent. The improved design of the duct structure can effectively reduce the airflow velocity at the outlet, obtaining a more robust and thick low-frequency while reducing distortion The high-power unit can withstand a peak power of up to 9600 watts in an instant, and the larger mechanical displacement distance also brings more mass or volume of air compression, while ensuring lower distortion and good linear response at high power output, maintaining a good musical taste
M20XAP is an active speaker that uses two 10 inch mid low frequency units combined with a 3-inch high-frequency compression driver The special structural design with a continuous power of up to 500W and the unique angle design of M20XAP can meet the needs of 6-meter stage use. M20XAP can be fully applied to stage monitoring and lip speakers The efficient unit configuration of M20XAP speaker can produce a maximum sound pressure level of 134dB in a compact volume, which is sufficient for sound reinforcement applications within a projection distance of 15 meters The M20XAP speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved The M20XAP is equipped with a power amplification module with a built-in DSP. Four different parameters processed by the DSP can be easily called according to different places, and the factory preset parameter settings of frequency response, frequency division, phase, and transient response can be obtained after careful processing. It can be quickly put into use with a good starting point The system can monitor the working status of various power modules in real time through RS485 network or remotely control and set the built-in DSP processing
The M-20 is a two-way full range speaker that uses two 10 inch mid to low frequency units combined with a 1.75-inch compression driver The continuous power can reach up to 500W, and the special structural design can be fully applied to stage monitoring and lip speakers The efficient unit configuration of the M-20 speaker can produce a maximum sound pressure level of 132dB in a compact volume, which is sufficient for sound reinforcement applications within a projection distance of 10 meters The M-20 speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved
M-12AP is an active speaker that uses a 12 inch mid low frequency unit combined with a 1.75-inch compression driver The special structural design with a continuous power of up to 350W can be fully applied to stage monitoring The efficient unit configuration of M-12AP speaker can produce a maximum sound pressure level of 128dB in a compact volume, which is sufficient for sound amplification applications within a projection distance of 10 meters The M-12AP speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved The M-12AP is equipped with a built-in DSP processor to process parameter calls, which can obtain the effect of factory preset parameter settings after careful processing of frequency response, frequency division, phase, and transient response. It can be quickly put into use from a good starting point The system can monitor the working status of various power modules in real time through RS485 network or remotely control and set the built-in DSP processing
M-12 is a two-way full range speaker that uses a 12 inch mid low frequency unit combined with a 1.75-inch compression driver The special structural design with a continuous power of up to 350W can be fully applied to stage monitoring The efficient unit configuration of the M-12 speaker can produce a maximum sound pressure level of 128dB in a compact volume, which is sufficient for sound reinforcement applications within a projection distance of 10 meters The M-12 speaker has a continuous and smooth phase response, balanced frequency response, and constant coverage direction. After being processed by DSP, its performance and reliability can be further improved
DB-541 is a full range speaker used in small and medium-sized occasions The DB-541 speaker adopts four 5-inch mid low frequency units combined with a 1.7-inch neodymium magnetic high-frequency compression driver. The optimized unit combination of high-frequency waveguide horn design enables the DB-541 speaker to provide uniform 90 degree constant directional control in the horizontal direction The sound column speaker is compact in size and easy to conceal for installation. It can be widely used in various venues with limitations on speaker installation to meet multifunctional needs. Its applications include conference rooms, classrooms, bars, stations, squares, sports facilities, theme parks, or other distributed high-quality sound reinforcement systems The DB-541 column array speaker, combined with the DB-1504AP low-frequency speaker, extends the low-frequency response below 40Hz The built-in power amplifier of DB-1504AP provides an additional output for DB-541, and the entire combination can be set up by selecting the matching parameters of the DSP
DB-561 is a full range speaker used in small and medium-sized occasions The DB-561 speaker adopts 6 5-inch mid low frequency units combined with a 1.7-inch neodymium magnetic high-frequency compression driver. The optimized unit combination of high-frequency waveguide horn design enables the DB-561 speaker to provide uniform 90 degree constant directional control in the horizontal direction The sound column speaker is compact in size and easy to conceal for installation. It can be widely used in various venues with limitations on speaker installation to meet multifunctional needs. Its applications include conference rooms, classrooms, bars, stations, squares, sports facilities, theme parks, or other distributed high-quality sound reinforcement systems The DB-561 column array speaker, combined with the DB-1804AP low-frequency speaker, extends the low-frequency response below 40Hz The built-in power amplifier of DB-1804AP provides an additional output for use with DB-561, and the entire combination can be set up by selecting the matching parameters of the DSP
DB-821 is a full range speaker suitable for small and medium-sized applications The DB-821 speaker adopts two 8-inch mid low frequency units combined with a 3-inch neodymium magnetic high-frequency compression driver. The optimized unit combination of high-frequency waveguide horn design enables the DB-821 speaker to provide uniform 90 degree constant directional control in the horizontal direction The design of the sound column can also maintain good projection ability in the high frequency range over a long distance The sound column speaker has a compact size and is easy to hide and install. It can be widely used in various venues with limitations on speaker installation to meet the needs of multifunctional use. Ideal application scenarios include conference rooms, classrooms, bars, stations, squares, sports facilities, theme parks, or other distributed high-quality sound reinforcement systems The DB-821 column array speaker, combined with DB-1504AP and DB-1804AP low-frequency speakers, extends the low-frequency response below 40Hz The built-in power amplifier of DB-1504AP and DB-1804AP provides an additional output for DB-821, and the entire combination can be set up by selecting the matching parameters of the DSP
The DB-1804AP low-frequency speaker is equipped with a high-power 18 inch low-frequency unit, which benefits from the natural extension of the transmission line design and effectively improves the low-frequency response and sensitivity DB-1804AP is equipped with a high-quality CLASS-D digital power amplifier, which has the characteristics of small size, light weight, high efficiency, and low heat generation. At the same time, it is also equipped with a built-in DSP processor to process parameter calls and obtain the effect of factory preset parameter settings after careful processing of frequency response, frequency division, phase, and transient response. It can be quickly put into use from a good starting point The built-in power amplifier of DB-1804AP provides an additional output for full frequency use, and the entire combination can be set up by selecting the matching parameters of the DSP DB-1804AP combined with DB-821 column array speaker can provide uniform 90 degree constant directional control The design of the sound column can also maintain good projection ability in the high frequency range over a long distance It can be widely used in various venues with limitations on speaker installation to meet multifunctional usage needs. Ideal application scenarios include conference rooms, classrooms, bars, stations, squares, sports facilities, theme parks, or other distributed high-quality sound reinforcement systems
T .
M .
W .
A .
Room 701, Building 2, Jimei Intelligent Park, No.9 Xinkai Road, Wusha Community, Daliang Street, Shunde District, Foshan, China
